Product Description : Ready to use, Higher Coverage, Fast Drying, High Bonding Strength. Ombond EB" is a Extra Bonding synthetic resin adhesive intended for wood working and various materials where one of the surfaces to be bonded is porous. Ombond Extra Bonding strongly binds wood, plywood, laminate, veneers, MDF and all types of boords.
Areas of Application :
Plywood to Lominate
Hot Press / Cold Press
Other general purposes
Application Methods :
Surfaces to be, bonded should be free from oil, grease, and dust and dirty.
Should be dry and properly leveled.
For best results, roughen the surfaces to be bonded.
Stir content of container before use
Apply even coats of OMBOND EB first on comparatively on porous surface fore.g. apply first on porous surface like plywood, MDF, particleboard.
Do not allow adhesive ro dry, and bring both the surfaces in contact together, make proper alignment and start pressing from one side by using wet squeezed cloth to ovoid bubble, and ensuring uniform contact and no air interruption between both the'surfaces.
Pressure can be given using nails, clamps, weight, masking tope etc.
Product Features :
Excellent compatibility with Plywood and Lamination
High Strength with long & durable bonding
Excellent Spread ability and High Coverage
Excellent heat resistance '
Product Benefits :
Best Solution for fixing lamination 'sheets Helpful
Good for Lamination
Excellent for heat prone applications like kitchen or high temperature climatic zones.