Product Description : Low cost adhesive. Mainly used for readymade furniture making and wood filling application.
Areas of Application :
For mica pressing 0.8 mm.
For wood filling.
Application Methods :
Surfaces to be bonded should. be free from oil. grease, and dust and dirty.
Should be dry ane properly leveled.
For best results, roughen the surfaces to be bonded.
Stir content of container before use.
Apply even coats of OMBOND Omcol first on comparatively on por,ous surface for e.g. apply first on porous surface like plywood. MDF. particle board.
Do not allow adhesive fo dry. and bring both the surfaces in contact together, make proper alignment and start pressing from one side by using wet squeezed cloth to avoid bubbles, and ensuring uniform contact and no air interruption between both the surfaces.
Pressure can be given using. nab, Clamps. Weight, masking tape etc.
Product Features :
Excellent compatibility with Plywood and Lamination